Europe

Manuals

7EnglishB64-4382-10_E_En.pdfDownload12,462 kB
8English (GPS NAVI)B64-4340-00_en.pdfDownload985 kB


Instruction Manual

ecoROUTE_(EN).pdf (111.1 kb)
navigation instruction manual (353.12 kb)
Installation manual (725.22 kb)
Instruction manual (12.12 Mb)

Firmware

12009 Navigation/Multimedia receiver firmware updates (27 April 2011)/cs/ce/mm/firmware/2009c/eng.html
2Navigation software updater on Garmin websitehttps://kenwood.garmin.com/kenwood/site

iPod and iPhone Compatibility List

This site can be used to check the compatibility between KENWOOD's Receiver, and iPod interface adapter.
Select your iPod/iPhone and KENWOOD receiver. Compatibility information and the adapter model which is needed for the connection are displayed.

Select the iPod

Select an iPod:

Select the KENWOOD receiver

Select an initial of the model name:
 
Select a model name:
 
 
iPod
iPhone
iPhone 13 Pro iPhone 13 Pro MAX iPhone 13 iPhone 13 mini iPhone 12 Pro iPhone 12 Pro MAX iPhone 12 iPhone 12 mini iPhone SE (2nd generation) iPhone 11 Pro iPhone 11 Pro MAX iPhone 11 iPhone XS iPhone XS Max iPhone XR iPhone X iPhone 8 iPhone 8 Plus iPhone 7 iPhone 7 Plus iPhone SE iPhone 6s iPhone 6s Plus iPhone 6 iPhone 6 Plus iPhone 5s iPhone 5c iPhone 5 iPhone 4S iPhone 4 iPhone 3GS iPhone 3G iPhone iPod touch (7th generation) iPod touch (6th generation) iPod touch (5th generation) iPod touch (4th generation) iPod touch (3rd generation) iPod touch (2nd generation) iPod touch (1st generation) iPod nano (7th generation) iPod nano (6th generation) iPod nano (5th generation) iPod nano (4th generation) iPod nano (3rd generation) iPod nano (2nd generation) iPod nano (1st generation) iPod classic iPod photo iPod (5th generation) iPod (4th generation) iPod (3rd generation) iPod mini

       : You cannot connect iPod as a source.

Check your iPod/iPhone. The connectable model depends on the generation. Check with your manufacturer for the generation of your iPod/iPhone.

iPod/iPhone may not be available in certain market.

Your iPod/iPhone


Reselect your iPod/iPhone.

Your KENWOOD receiver

DNX9240BT

Reselect your KENWOOD receiver.


iPod/iPhone connection

You cannot connect iPod as a source.
Connect as follows:

To listen music and watch video

KNA-13HC + KCA-iP103

KNA-13HC
KCA-iP103

・High Speed HDMI cable
・USB Direct Connection Cable for iPod (Audio)

Connect the unit and iPod /iPhone with listed KENWOOD accessory iPod cable, HDMI cable and the Apple Lightning Digital AV Adapter.
Do not keep the Apple Lightning Digital AV Adapter in the car to avoid damage by heat.

The Bluetooth settings are also necessary.

KNA-13HC

KNA-13HC

High Speed HDMI cable

Connect the unit and iPod /iPhone with listed KENWOOD HDMI cable and the Apple Lightning Digital AV Adapter, Lightning to USB Cable (accessory of the iPod/iPhone).
Do not keep the Apple Lightning Digital AV Adapter and Lightning to USB Cable (accessory of the iPod/iPhone) in the car to avoid damage by heat.

The Bluetooth settings are also necessary.

KCA-HD100 + KCA-iP103

KCA-HD100
KCA-iP103

・High Speed HDMI cable
・USB Direct Connection Cable for iPod (Audio)

Connect the unit and iPod /iPhone with listed KENWOOD accessory iPod cable, HDMI cable and the Apple Lightning Digital AV Adapter.
Do not keep the Apple Lightning Digital AV Adapter in the car to avoid damage by heat.

The Bluetooth settings are also necessary.

KCA-HD100

KCA-HD100

High Speed HDMI cable

Connect the unit and iPod /iPhone with listed KENWOOD HDMI cable and the Apple Lightning Digital AV Adapter, Lightning to USB Cable (accessory of the iPod/iPhone).
Do not keep the Apple Lightning Digital AV Adapter and Lightning to USB Cable (accessory of the iPod/iPhone) in the car to avoid damage by heat.

The Bluetooth settings are also necessary.

KCA-iP302

KCA-iP302

iPhone & iPod video/audio direct cable for KENWOOD visual model

KCA-iP212

KCA-iP212

iPhone & iPod video/audio direct cable for KENWOOD visual model

KCA-iP202

KCA-iP202

iPhone & iPod video/audio direct cable for KENWOOD visual model

KCA-iP22F

KCA-iP22F

iPhone & iPod video/audio direct cable for KENWOOD visual model

KCA-iP301V

KCA-iP301V

iPhone & iPod video/audio direct cable for KENWOOD visual model

KCA-iP240V

KCA-iP240V

iPhone & iPod video/audio direct cable for KENWOOD visual model

KCA-iP300V

KCA-iP300V

iPod video/audio direct cable for KENWOOD visual model

KNA-i909

KNA-i909

iPhone 3G/iPod video/audio interface cable for KENWOOD navigation model (japan)

To listen music

Include model

KCA-iP103

KCA-iP103

USB Direct Connection Cable for iPod (Audio)

Lightning to USB Cable

Lightning to USB Cable

Do not keep the Apple Lightning to USB Cable (accessory of the iPod/iPhone) in the car to avoid damage by heat.
Video files cannot be played back through this connection.

Bluetooth

Bluetooth

To listen to music via Bluetooth.

The Bluetooth settings are necessary for connection.

KCA-iP102

KCA-iP102

iPhone & iPod audio direct cable for KENWOOD audio model

KCA-iP101

KCA-iP101

iPhone & iPod audio direct cable for KENWOOD audio model

KCA-iP100

KCA-iP100

iPod audio direct cable for KENWOOD audio model

KCA-iP200

KCA-iP200

iPod audio direct cable for KENWOOD audio model

KCA-iP500

KCA-iP500

iPod audio interface kit


Title display possibility SW position1 SW position2
The title named with iTunes can be displayed.no Down Up DownUp

Remark


Common notes

Before connecting KCA-iP500 to KENWOOD control unit, please make sure your iPod's software is updated to the latest version which are possible to download from APPLE OFFICIAL WEBSITE.
If the software is not updated,connection problem with KCA-iP500 may happen, and the Control unit may not properly playback music files from your iPod.

Data information is dependant on the Head Unit display capability.

Depending on the connected control unit, source name may be displayed "EXT-MEDIA", "*-MEDIA" or CD Changer ("CD-CH"etc.).
Please see the manual of the control unit.

DNPS function of the control unit cannot be operated with KCA-iP500.
(Please see the manual of the control unit about the DNPS (Disc Name PreSet) function.)

After connecting your iPod to the KCA-iP500, the first track played will be the track you played last with your iPod,and "RESUMING"will be displayed while playback, since the title number and title name can not be displayed correctly.
When browsing item or title is changed, the first track selected will be automatically recongnized as track number 1,disc number1 in the Playlist,and correct title number and name will be displayed.

KNA-i990

KNA-i990

iPod video/audio interface cable for KENWOOD navigation model (japan)

KNA-i770

KNA-i770

iPod video/audio interface cable for KENWOOD navigation model (japan)

KNA-i77

KNA-i77

iPod video/audio interface cable for KENWOOD navigation model (japan)


iPod function list

iPod Interface Adaptor Include model
KNA-13HC
KCA-HD100
KCA-iP103
Lightning to USB Cable
Bluetooth
KCA-iP302
KCA-iP212
KCA-iP202
KCA-iP22F
KCA-iP102
KCA-iP301V
KCA-iP240V
KCA-iP101
KCA-iP300V
KCA-iP100
KCA-iP200
KNA-i909
KNA-i990
KNA-i770
KNA-i77
KCA-iP500
Basic operation
iTunes Tagging HD Radio™ *1
RBDS FM
SiriusXM *1
App & iPod Control Mode/
iPod Control By Hand Mode
iPod EQ
Alphabet Search
Skip Search
Related Search
External Mode

yes = Feature is supported and confirmed.
no = Feature is not supported by the KENWOOD receiver.


Remark

* Be sure to update the KENWOOD unit to the latest firmware. (February 15, 2010)
See Update Guide
 

*1 HD Radio broadcast is available only in the USA and some countries.

*1 HD Radio and SiriusXM broadcast is available only in the USA and some countries.

* KTC-HR300 (optional) is necessary to receive HD Radio broadcast.

* It works when KCA-iP22F/ KCA-iP240V is used for connection.

* It works when KCA-iP301V is used for connection.

* SXV-100/200 (optional) is necessary to receive SiriusXM broadcast.

* SiriusXM broadcast is available only in the USA and some countries.

* If the iOS software is upgraded to iOS 4.1, the Songs list is not displayed.

* If the iOS software is upgraded to iOS 4.1, resume play may be disabled.

* If the iOS software is upgraded to iOS 5.0, resume play may be disabled.

Be sure to update the KENWOOD unit to the latest firmware. (April 5, 2010)
*See Update Guide
 

Be sure to update the KENWOOD unit to the latest firmware. (July 28, 2009)
*See Update Guide
 

Be sure to update the KENWOOD unit to the latest firmware. (December 11, 2007)
*See Update Guide
 

Please use the cable in the iPod housing base.

Plays back music files only.

iPod cannot be charged during connection.

Note: If your "USB" connected devise does not function (e.g. iPhone4, etc. ), please re-connect your "USB" device using "iPod 1 USB port".
Need help, please contact us;
For USA customer's please dial (310) 761-8802 or toll free 1-800-KENWOOD (536-9663)
For Canadian customer's please send an e-mail to techsupport@KENWOOD.ca

Connect the unit and iPod /iPhone with listed KENWOOD accessory iPod cable and the Apple Lightning - 30 pin adapter.
Do not keep the Apple Lightning - 30 pin adapter in the car to avoid damage by heat.
Video files cannot be played back through this connection.

Connect the unit and iPod /iPhone with the attached iPod cable and Apple Lightning - 30 pin adapter.
Do not keep the Apple Lightning - 30 pin adapter in the car to avoid damage by heat.
Video files cannot be played back through this connection.

Audio Signal Only.
No output for audio and video signal of video file when connecting the iPod 5th generation.

Audio/Video Signal compatible.

The cable equivalent to KCA-iP100 is included.

The cable equivalent to KCA-iP101 is included.

The cable equivalent to KCA-iP301V is included.

When the DNPS function of the center unit is operated, system will restrict title selection or other functions of the iPod for ten seconds. (Will resume in ten seconds.)

Connectivity between KCA-iP500 and "KVT" & "DDX" series video models.
When the disc is changed, "EJECT" will show up instantly.
Song file over #101 may not be displayed correctly on some of the 'KVT' & 'DDX' video models.
Link

The list of the playlist etc. cannot be correctly displayed and controlled.

The Fast Forwarding and Reviewing function does not operate.
(File search function is available.)
When KCA-iP500 is connected to KCA-S210A, no other slave unit is possible to connect.

The Browsing item selectable is only "PLAYLIST".

When switching playlist etc., disc number "7" may show up instantly.

Sound jumps during playback.

If the iOS software is upgraded to iOS 4.1, sound jumps during playback.

When the iOS 4.1 software is used, sound jumps during playback. Upgrade it to the latest version.

If the iOS software is upgraded to iOS 4.1, resume play may be disabled.

If the iOS software is upgraded to iOS 5.0, resume play may be disabled.

yes no *

Attention

Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

Apple, iPhone, iPod, iPod classic, iPod nano, iPod touch, and Lightning are trademarks of Apple Inc., registered in the U.S. and other countries. iPod mini is a trademark of Apple Inc.


Page Top Page Top

KENWOOD Bluetooth Compatibility List

This web site provides the compatibility information of your cell-phone and the KENWOOD Bluetooth unit.

Select your KENWOOD Product and your cell-phone. The compatibility information will be displayed.

Select KENWOOD Product

Select an initial of the model name:
Select the model name:
Select the Bluetooth unit:

Select Cell-phone

Select the brand:
Select the cell-phone:

Control Units compliant with KENWOOD Bluetooth Unit

Remote Controller Bluetooth KCA-BT300/ KCA-BT200
SW1: Display Character Conversion *3 SW2: Interface SW3: Year
  *1 *2   *5 *6      

*1You can not dial numbers from this model.

*2Operation on the Head Unit is necessary in order to switch to dialing mode. Optional accessory: Compatible with KCA-RC547 (Remote Controller with Dialing Mode function).

*3Display Character Conversion: If the control unit cannot display accent characters such as "ü" and "ä", set the display character conversion function switch to "ON" to convert them to "U" and "A".

*5Year 2007 and older models do not provide a prioritized connect/disconnect indication for an audio device among the BT audio sources.

*6Optional connection cable (KNA-BT909) is necessary for using this unit.

*8Sort Order function of hands-free Setup may not operate depending on the cell-phone.

*9Be sure to update the KENWOOD unit to the latest firmware. (April 24, 2012)
See Update Guide


Supported Cell-phone Compatibility List

In the compatibility list, the suitable Bluetooth Firmware version is displayed in the <KENWOOD Bluetooth Firmware version> row.

If you need to change the firmware, proceed to <About the Bluetooth module firmware updater>.

yes = Feature is supported and confirmed.
no = Function unavailable.


Remark

When the pairing is carried out by operating the cell-phone, "CK5050N" may appear in the device list.

In some cases you are required to choose "YES" on the pop-up screen of your cell phone.

In some cases you are required to choose "NO" on the pop-up screen of your cell phone.

You need to open the slide of your cell phone.

You need to switch to the standby screen.

It operates, but the cell phone displays "ERROR".

When you connect A2DP, the music starts automatically.

Cell phone will reboot.

Please make sure that Keypad is not locked.

When you switch to "Private mode", it cuts-off Bluetooth connection.

The category type in the Phone Book of this unit (such as "General", "Home", "Mobile", "Office" and "Other") may differ from that in the Phone Book of your cell-phone.

If you perform the redial operation on your control unit, the outgoing call record is displayed on your cell-phone. (Redial operation is impossible from the cell-phone.)

If you "Off-hook" when receiving call, it enters "Private mode".

If you make calls when connecting Bluetooth, it enters "Private mode".

You need to press "unhold" of your cell phone.

If you "Off-hook" when receiving call, it cuts-off Bluetooth connection.

If a call is made from your cell-phone, the contact information such as name and phone number will not be displayed on the control unit.

The audio link used is SCO.

The audio link used is eSCO.

Connection may fail due to surroundings.

* Depending on the OS or the firmware version of the cell-phone, Bluetooth features may not work. Refer to the website or FAQ provided by the cell-phone supplier for more information.


Common notes

The functions of the models listed on the table are checked under certain conditions at the date of issue.
Please note that performance may be different from the table above due to modification of phone specifications made after testing.

Please note that the cell-phone models for which no information is provided, or whose operation capabilities are not confirmed are not listed.

This result is based on the sample unit of each model used for testing. It does not prove the operation of all the units of the same model.

For operation of the cell-phone, please refer to the cell phone instruction manual.

KCA-BT300/KCA-BT200 is compatible with the following profiles.
HFP (Hands-Free Profile)
HSP (Headset Profile) * HSP may or may not be connectable from a cellphone to our Bluetooth device.
OPP (Object Push Profile)
PBAP(Phonebook Access Profile)
SYNC(Syncronization Profile)
SPP(Serial Port Profile)
A2DP(Advanced Audio Distribution Profile)
AVRCP(Audio/Video Remote Control Profile)

KENWOOD Bluetooth Products are compatible with the following profiles.
HFP (Hands-Free Profile)
HSP (Headset Profile) * HSP may or may not be connectable from a cellphone to our Bluetooth device.
OPP (Object Push Profile)
PBAP(Phonebook Access Profile)
SYNC(Syncronization Profile)
SPP(Serial Port Profile)
A2DP(Advanced Audio Distribution Profile)
AVRCP(Audio/Video Remote Control Profile)

KENWOOD Bluetooth Products are compatible with the following profiles.
HFP (Hands-Free Profile)
HSP (Headset Profile) * HSP may or may not be connectable from a cellphone to our Bluetooth device.
OPP (Object Push Profile)
PBAP(Phonebook Access Profile)
SYNC(Syncronization Profile)
SPP(Serial Port Profile)

Noise may be produced during the call.

Echoing may be heard loudly during the call.

Noise may be produced when receiving a call or switching to conversation.

The ring tone or phone volume may be set loud for some cell-phone models. Make sure to adjust the volume before driving.

There are models which do not transfer "+"-mark (International call mark) with the Bluetooth connection.
In this case, the incoming call list of KCA-BT300/KCA-BT200 cannot be used for making a call.

There are models which do not transfer "+"-mark (International call mark) with the Bluetooth connection.
In this case, the incoming call list of KENWOOD Bluetooth Products cannot be used for making a call.

There are models which do not transfer "+"-mark (International call mark) with the Bluetooth connection.
In this case, the incoming call list of KENWOOD Bluetooth Products cannot be used for making a call.

There are models which cannot make a call unless the standby display is shown.

If connection with the cell-phone cannot be made, restart the cell-phone.

Do not turn off the Head Unit while transferring the phone book.

There are models where the phone book memorized in the SIM card cannot be transferred.
In this case, copy the phone book in the memory of the cell-phone, and then try to transfer.

If a phone book cannot be transferred one by one, try to use the function of all phone book transfer.

Do not leave the cell-phone inside the vehicle. This could damage the cell-phone.

Depending on the connection with the cell-phone, it may take a while to delete the registration of the cell-phone or to switch to another cell-phone.

The following numbers and characters can be used for phone numbers: 0 to 9,+, *, #
If a character other than the above is used, the phone number cannot be transferred correctly.

If a call terminates from a phone with caller identification disabled, the caller name and number may not be displayed normally.

Audio playing on A2DP (streaming audio) may be interrupted for seconds after its start.

Audio playing on A2DP (streaming audio) may be interrupted for seconds after its start.

The type of audio device used may result in a slow response on AVRCP (remote operation).

The type of audio device used may result in a slow response on AVRCP (remote operation).

If any Bluetooth operation, such as downloading a phonebook, is carried out while audio is playing on A2DP, the audio may be interrupted.

If any Bluetooth operation, such as downloading a phonebook, is carried out while audio is playing on A2DP, the audio may be interrupted.

The date and time of SMS reception may not be synchronized with those of call reception on the cellphone.

Depending on the combination of devices connected on Bluetooth, A2DP audio (streaming audio) may be interrupted when it plays.

Depending on the combination of devices connected on Bluetooth, A2DP audio (streaming audio) may be interrupted when it plays.

Depending on the type of cellphone connected, the audio device connected on A2DP may sound at call origination.

Depending on the type of cellphone connected, the audio device connected on A2DP may sound at call origination.

In the phone book and on SMS, \ (\) will appear as \\ (\\).

If subindexes (such as mobile and home) are used with Voice Recognize, remote subscribers may not be called up normally unless all the subindexes are entered.

Subindex phonebook data is not updated by downloading phonebook data.



About the Bluetooth module firmware updater

Download the firmware compatible with your cell-phone.

If you can use your cell-phone without problems at the moment, there is no need to update the firmware.

If you do not know the current firmware version of your KENWOOD Bluetooth unit, refer to <Checking the Firmware Version>.

Checking the Firmware Version

Procedure manual (*** KB)

KENWOOD Bluetooth Firmware is downloaded


*Update the System firmware to Ver.1.10.0 or above. (31 May 2013)
See Update Guide

*Update the System firmware to Ver.1.2.0 or above. (31 May 2013)
See Update Guide

*Update the System firmware to Ver.1.10.0 or above. (31 May 2013)
See Update Guide

Audio File Specification

About AAC, MP3, WMA and WAV

The playable AAC/MP3/WMA/WAV file (hereafter called Audio file) and the media format has the following limitation. The Audio file, which is not conforming to the specification, may not play normally, or the file and folder names may not display correctly.

Playable Audio file

MP3 Extension .mp3
Format MPEG 1/2 Audio Layer 3 file
Transfer bit rate 32-320 kbps / Variable Bit Rate
Sampling frequency 8/ 11.025/ 12/ 16/ 22.05/ 24/ 32/ 44.1/ 48 kHz
Joint STEREO
ID3 Tag (Ver.1) Ver1.0/ 1.1 (Title/ Artist/ Album)
ID3 Tag (Ver.2) Ver2.2/ 2.3/ 2.4 (Title/ Artist/ Album)
WMA Extension .wma
Format The file in accordance with Windows Media Audio
(Except for the file for Windows Media Player 9 or after which applies the new functions)
Transfer bit rate 48-192 kbps / Variable Bit Rate
Sampling frequency 32/ 44.1/ 48 kHz
DRM file
Professional
Lossless
Voice
WMA Tag (Content Description) (Title/ Artist)
WMA Tag (Extended Content Description) (WM/Album Title)
AAC-LC Extension .m4a, .aac
Format ".m4a" file encoded by AAC-LC format.
Transfer bit rate 16-320 kbps
Sampling frequency 16/ 22.05/ 24/ 32/ 44.1/ 48 kHz
DRM file
2 channel
Multi channel
ID3 Tag (Ver.2)
iTunes m4a Meta-data (Song Info.) (Title/ Artist/ Album)
WAV Extension .wav
Format RIFF waveform Audio Format (only for LinearPCM)
Sampling frequency 11.025/ 12/ 16/ 22.05/ 24/ 32/ 44.1/ 48/ 96 KHz
Bit count 8/ 16 bit
Channel Stereo/Monaural

Do not attach the extensions to files other than the Audio file. If the extension is attached, the file, which is not the Audio file, will play and outputs a loud noise, causing damage to the speaker.

The files with copy protection cannot be played.

Audio files cannot be played depending on the encoding software setting, USB device type, and/or recording conditions.

The unit may not be compatible with upgrade of compression format standard and additional specifications.

There are times when play time is not displayed correctly depending on the Audio file recording conditions.

Sound of WAVE file may be interrupted depending on the performance of the recording media.

Playable storage media file system

Disc media
(DVD±R/RW
CD-R/RW)
File system (Windows) ISO 9660 Level 1/2
ISO 9660 Level 3
Romeo
Joliet
Long File Name
File system (Macintosh)
File system (UNIX)
Multi-Session *1
USB device File system (Windows) *2 FAT16
FAT32
File system (Macintosh)
File system (UNIX)

CD-RW discs which are quick formatted by the writing software cannot be used.

When recording to the maximum CD-R/RW media capacity at once, the writing software is set to "Disc at once".

Joliet is recommended for file system of CD-R/RW. With other file systems, the display may not be shown correctly depending on the operating conditions.

*1 For CD-DA/ audio file mixed disc, the unit plays only the playback system recorded at the first setout.

*2 Multi Partition : Not compatible (Some USB devices may have multiple partitions that will be invisible on Windows OS.)

When the CD-R/RW recorded by CD-ROM MODE 2 (XA) format cannot be played, please record again by using CD-ROM MODE 1 writing format.

Limitation of structure for the file and the folder

Disc media
(DVD±R/RW
CD-R/RW)
Maximum number of directory levels 8
Maximum number of folders 254
Maximum number of files per folder 255
Maximum number of files (per device) 65025
USB device Maximum number of folder layers 8
Maximum number of folders (per device) 255
Maximum number of files (per folder) 255
Maximum number of files (per device) 65025
Maximum number of files per playlist 7000

It may take time to start playing depending on the recording conditions such as file hierarchy and folder structure.

This includes the Root folder (the folder in the top level). The number of folders shown on your PC is less than it by 1.

The maximum number of characters for display

File/Folder name 128 characters
MP3 ID3 Tag Ver. 1.x 30 characters
Ver. 2.x 128 characters
WMA Contents property 128 characters
AAC song information 128 characters

Number of characters is based on byte unit.

File/Folder name is the number of the characters including the extensions.

This unit can display the following versions of MP3 ID3 tag: version 1.0/ 1.1/ 2.2/ 2.3/ 2.4.

AAC ID3 Tag cannot be displayed.

Page to Top Page top

Video File Specification

Acceptable video files

MPEG-1 Extension .mpg, .mpeg, .m1v
Format MPEG-1
Picture size 352 × 240, 352 × 288
Video bit rate Max. 1.5 Mbps
Audio format MPEG Audio Layer 2
Audio sampling frequencies 32/ 44.1/ 48 kHz
Audio bit rate 32–384 kbps (Only constant bit rates)
MPEG-2 Extension .mpg, .mpeg, .m2v
Format MPEG-2
Profile & Level MP@ML (Main Profile at Main Level)
Picture size 720 × 480, 720 × 576
Video bit rate Max. 2.0 Mbps (USB device)
Audio format MPEG Audio Layer 3
Audio sampling frequencies 32/ 44.1/ 48 kHz
Audio bit rate 32–384 kbps (Only constant bit rates)
DivX Extension .divx, .div, .avi
Format DivX
Picture size 352 x 240, 352 x 288, 720 x 480, 720 x 576
Video bit rate Max. 2.0 Mbps (USB device)
Audio format MP3, Dolby Digital
Audio sampling frequencies 32/ 44.1/ 48 kHz
Audio bit rate 32–384 kbps (Only constant bit rates)

Page to Top Page top

Picture File Specification

Acceptable picture files

Extension .jpg, .jpeg
Format JPEG
Baseline format Up to a maximum of 8192(W) × 7680(H) pixels
Progressive format Up to a maximum of 1600(W) × 1200(H) pixels
File size Max. 512 K bytes

Enlarges and reduces images up to the size shown above to fit to the screen.

The picture files with information attached (such as Exif) may not be displayed or operated (e.g.: rotation display) properly.

Page to Top Page top

About USB device

Notes on Use of the USB device

This unit can play audio files stored in the flash memory and digital audio player that have a USB port (these devices are referred to as USB devices in this document).
The following restrictions are placed on the types and usage of available USB devices:

Available USB Devices

USB standard USB 2.0
USB class Mass storage class (MSC device)
USB subclass SCSI
Protocol Bulk Only
Current supply Max. 500 mA

USB Mass Storage Class:
USB devices that the PC can recognize as an external storage without using any special driver or application software.

Contact the sales agent as to whether your USB device conforms to the USB mass storage class specs.

Using an unsupported USB device can result in abnormal playback or display of the audio file.
Even if you use the USB device conforming to the above specs, audio files cannot be played normally depending on the type or condition of the USB device.

Some of the functions is are limited with a certain USB device.

Normal operation and power supply is not guaranteed against every USB devices.

About the Connection of the USB device

When connecting the USB device, usage of the CA-U1EX (option) is recommended.

Normal playback is not guaranteed when a cable other than the USB compatible cable is used. Connecting a cable whose total length is longer than 5 m can result in abnormal playback.

You cannot connect a USB device via a USB hub.

Install the USB device in the place where it will not prevent you from driving your vehicle properly.

Do not leave the USB device in the vehicle for a long time. It can deform or damage due to direct sunlight, high temperature, etc.

Take backups of the audio files used with this unit. The files can be erased depending on the operating conditions of the USB device.
We shall have no compensation for any damage arising out of erasure of the stored data.

Leave the cap on when not using an USB device.

Page to Top Page top