Europe

TK-8360E
  • TK-8360E
  • TK-8360E
  • TK-8360E

Additional Images

TK-8360E

UHF Compact Synthesized FM Mobile Transceiver (EU use)

 

Discontinued model

 

Supplied With

D.C. CableYes
FuseYes, 10 A
Instruction ManualYes, English, Spanish, German, French, Dutch, Italian, Turkish & Greek
Mounting BracketYes
Screw SetYes

PMR General Features

Blue colour LEDYes
3-colour LED (Red, Orange, Green)Yes
5-Tone Signalling formats(requires special license ID)
Busy Channel Lock-outYes
Calling AlertYes
Compact DesignYes
Companded AudioYes
DB-15 Accessory ConnectorYes; can also be programmed as 8 individual Accessory Ports
DTMF FunctionYes
Ease of Operating UseYes
Easy Option Port (26-pin)Yes
Embedded MessageYes
Emergency Call FunctionYes
Emergency KeyYes
Enhanced Kenwood AudioYes
FleetSyncYes
Front-mounted LoudspeakerYes
GPS CompatibleYes
Horn Alert/PA FunctionYes
Independent Setting per ChannelCompander, Scrambler, Wide/Narrow Deviation & Hi/Lo Power
Kenwood ESN (Electronic Serial Number)Yes
Key LockYes
Lone Worker FunctionYes
MDC-1200Yes
Minimum-Volume SettingYes
Monitor ButtonYes
MPT Trunking (option)Firmware Upgrade
Multiple Scanning FunctionYes
Operator Selectable ToneYes
Programmable Function Keys10 Programmable Function Keys
PTT IDYes
QT (CTCSS) / DQT (digital)Yes
Remote Stun and ReviveYes
RSSI Level IndicatorYes
SelCall FunctionYes
Selectable Microphone GainYes
Switchable Display BacklightingYes
Talk AroundYes
"Talk Back" Scanning FunctionYes
Time-Out TimerYes
Transceiver PasswordYes
Voice Inversion ScramblerYes
Voting FunctionYes
Windows PC Programming and TuningYes
Wired Cloning FunctionYes

FleetSync Signalling Features

External-device SwitchingYes, External devices can be switched (via the AUX output) on receipt of a status ID code
Paging Call FunctionYes
PTT ID Digital ANIYes
Selective CallingYes
Short/Long Text MessagesYes
Status MessagingYes, Status messages are pre-programmed 2-digit codes from 10 - 99 (numbers 80 - 99 are reserved for special messages). Up to 15 messages can be stored in stack memory.

MDC1200 Signalling Features

Emergency Encode/DecodeYes
PTT ID Encode/DecodeYes
Radio check DecodeYes
Stun/Revive DecodeYes

Options

Internal GPS BoardYes - NMEA 0183 V2 compatible
"Molex" interfaceVia KCT-60M Cable
Voice Guide & StorageYes

Applicable Standards

R&TTE: EN300 086, 300 113, 300 219, 301 489Yes
EU Safety: EN60065, 60950-1, 60215Yes
Factory Quality Certification and LocationISO 9001. Manufactured in Singapore
For use in the EUYes
IP54Yes
MIL-STD 810 C/D/E/F/GYes

Technical Specifications

Frequency Range - E Type400-470 MHz
Number of Channels128
Number of Zones128
Channel Frequency Spread70 MHz
Channel Spacing - Analogue - Wide/Mid/Narrow25 kHz/20 kHz/12.5 kHz
Antenna Impedance - 50 OhmYes
Current DrainStandby: 0.3 A
Receive: 1.0 A
Transmit: 8.0 A
Frequency Stability± 2.5 ppm (-30 °C to + 60 °C)
Operating Temperature Range-30 °C to + 60 °C
Operating Voltage13.2 V DC ± 15%
PLL Channel Steps5.0 kHz/6.25 kHz
Dimensions160 x 43 x 136 mm (Projections not included)
Weight (net)1.2 Kg

Receiver Specifications

Adjacent Channel SelectivityWide/Mid/Narrow - 70/70/60 dB
Audio Output4 W with less than 5% distortion
Intermodulation67 dB
Sensitivity - EIA 12 dB SINAD0.28 µV at 25 kHz
0.28 µV at 20 kHz
0.35 µV at 12.5 kHz
Spurious & Image Rejection70 dB

Transmitter Specifications

RF Power Output (High/Low)25 W / 5 W
FM Noise (EIA)Wide/Mid/Narrow: 45/45/40 dB
Microphone Impedance600 Ohm
Modulation Distortion (Wide/Mid/Narrow)Less than 3%
Modulation Limiting± 5.0 kHz at 25 kHz
± 4.0 kHz at 20 kHz
± 2.5 kHz at 12.5 kHz
Spurious Emission (EN)-36 dBm ≤ 1 GHz
-30 dBm > 1 GHz

Accessories

Selected Accessories

(Consult your local dealer for all available accessories)